Blood Omen file formats

From Blood Wiki
Revision as of 23:49, 29 November 2012 by VorteX (Talk | contribs)

Jump to: navigation, search

Contents

This page is dedicated to the specifications for file formats used in Blood Omen. It encompasses exploring work done by the community since Blood Omen was released.

Most simple formats (such as .BIG file structure, TIM specs) were unveiled long time ago, but some ones (map format, sprites) was unveiled lately during Blood Pill development.

BIG file

This is general file storing all game resources. It's structure is quite simple:

uint32 - number of entries
Array of entries:
  uint32 - Hashed name of file
  uint32 - File size
  uint32 - File offset
Array of entry data:
  bytes - File contents
Tip: There can be gaps between files

TIM image

Playstation images. Used to store graphics and tiles. TIM specs are widely known, so it will be not listed here. Reference decoder/encoder can be found at Blood Pill sourcecode.

Tips:

  • Some pill.big entries can contain several TIM's glued together.
  • Some blood omen TIM files can contain tails with nulls.

Sounds

VAG

Playstation's Very-Audio-Good files (4-bit ADPCM variation) used in blood omen playstation version and by blood omen sneak peek preview. Unused in PC version. Reference decoder/encoder can be found in Blood Pill sourcecode.

Tips:

  • Many VAG files are headerless (having mess in the header, even no 'VAGb' fourCC, hence could only be detected by direct parsing).
  • Normally should be played at 11025hz, but some ones (music and some sounds) at 22050hz

RAW IMA ADPCM

Headerless files containing raw IMA ADPCM stream to replaces VAG files in PC version. They are using exactly same file names as VAG files in playstation version.

Tip: Files have no header at all

Waveform Audio File

Blood Omen PC version have some sounds in .WAV format (playstation have them in .VAG). This format is widely known and does not need to be explained.

Tip: It seems game doesnt use WAV headers, some file have bogus play rate and should be tweaked manually to play with correct rate thay listened in game

Video

PSX STR

Used in Blood Omen PlayStation version. STR is MJPEG video stream with interleaved audio. jPsxDec tool could be used to extract and decode this format from playstation CD images.

JAM Videos

JAM is lossy video compression format developed by Semilogic entertainment and used in Blood Omen PC version. The format uses shared palette for several frames and a form of dynamic compression. JAM spec and decoder was unveiled in 2011 by MisterGrim. JAM can only store video, audio was stored in separate .VAG file (which was for real, raw IMA ADPCM).

JAM videos have much more artifacts than STR, sound track is mono (STR have stereo).

JAM decompressing code can be found in Blood Pill sourcecode.

Sprites

Sprites are images of characters and animated stuff. There are 3 extensions as of filenames: SHA, SDR, SHD. However, when Blood Pill was developed, there were no knowledge of real file names, so this spec will define "Sprite types" which covers unpacking of all sprites, including unused ones.

Sprite type 1 - Item Cards

Always have 1 frame and no compression used.

uint32 - always 0x01 0x00 0x00 0x00 
uint32 - file size
768 bytes - 24-bit colormap data (256 colors)
int16 - x position
int16 - y position
byte - width
byte - height
byte - x
byte - y
width*height bytes - picture contents (indexes into colormap)
Tip: Really, it is simplified sprite type 3

Sprite type 2 - Images collection

Multiframe sprite with per-frame palette. Used by interface images collections (such as spell/item pics).

uint32 - number of frames
uint32 - file size
768 bytes - 24-bit colormap data (unused)
Array of frame headers:
  768 bytes - 24-bit colormap data
  uint32 - offset to the picture data from the end of headers
  ubyte - width
  ubyte - height
  byte - x
  byte - y
Array of frame picture data:
  width*height bytes - picture contents (indexes into colormap)
Tip: In some files real width/height may be double of what written in header

Sprite type 3 - Object sprites

Multiframe sprite with shared palette.

uint32 - number of frames
uint32 - file size
768 bytes - 24-bit colormap data
int16 - x offset for all frames
int16 - y offset for all frames
Array of frame headers:
  uint32 - offset to the picture data from the end of headers
  ubyte - width
  ubyte - height
  byte - x
  byte - y
Array of frame picture data:
  bytes - compressed picture contents (indexes into colormap) using run-length encodingE, some files using 4-bit color (see #Compression methods)

Tips:

  • It is unknown how to get what compression file do use (RLE on 0x00, or 0xFF or both), it seems engine gives that info when file get loaded
  • Some files are using 4-bit color instead of RLE

Sprite type 4 - character sprites

Multiframe sprite with shared palette, with additional frames headers. Used by characters. Pretty same as type 3.

uint32 - number of frames
uint32 - file size
Array of additional frame headers (rounded to the greatest multiplier of 4):
   byte - unknown info
768 bytes - 24-bit colormap data
int16 - x offset for all frames
int16 - y offset for all frames
Array of frame headers:
  uint32 - offset to the picture data from the end of headers
  ubyte - width
  ubyte - height
  byte - x
  byte - y
Array of frame picture data:
  bytes - compressed picture contents (indexes into colormap) using run-length encoding, some files using 4-bit color (see #Compression methods)

Tips:

  • It is unknown how to get what compression file do use (RLE on 0x00, or 0xFF or both), it seems engine gives that info when file get loaded
  • Some files are using 4-bit color instead of RLE

Sprite type 5

Another variation of type 3 with no offset info and (sometimes) broken width/height, which should be fixed with special trick.

uint32 - number of frames
uint32 - file size
768 bytes - 24-bit colormap data
Array of frame headers:
  uint32 - offset to the picture data from the end of headers
  ubyte - width
  ubyte - height
  byte - x
  byte - y
Array of frame picture data:
  bytes - compressed picture contents (indexes into colormap) using RLE  (see #Compression methods)

Tips:

  • Some frames have broken width/height because they width is above 255 and format uses 1 byte to encode it, 255 + [width] should be used to correct this
  • It is unknown how to get what compression file do use (RLE on 0x00, or 0xFF or both), it seems engine gives that info when file get loaded

Maps

Maps are central thing which brings all resources (images, sounds, tiles, sprites) together. There is about 80% of map structure revealed, allowing to extract general amount of things from it, including: textures used, a map image, monster/effect/item placement, triggers, info marks, doors and buttons etc.

Each map has a mapnum and section that is included in filename. That info is used to place map in a global adventure map (see TheLost Worlds - May survey for complete info about level naming).

Tiles

Tiles are 256-color TIM images compressed with LZ77 (see #Compression methods).

Each tile texture has 8x8 = 64 tiles. Engine renders all tile separately, switching current tile texture as needed.

uint32 - compressed data size
bytes - compressed data

Tips:

  • Since all tiles are 8-bit 256x256 TIM, unpacked data size is always same

Map file

Map file is fixed-length structure which holds tiles placement (80x80), enemies, lights, buttons and other objects to form Blood Omen level. Because of it's fixed nature, there are many limits, and each map file have exactly same size (so it can just be copied into memory).

// map trigger
typedef struct 
{
     unsigned short parm1;    // first parm, if script is not defined it's 0xFFFF, 0xFFFE is null value
                              //  - destination/source map number (TRIGGER_EXIT, TRIGGER_ENTRANCE, TRIGGER_TELEPORT)
                              //  - speech num (TRIGGER_INFOMARK, TRIGGER_IMAGEMARK)
     unsigned short parm2;    // second parm:
                              //  - button num (TRIGGER_BUTTON)
                              //  - pic num (TRIGGER_IMAGEMARK)
     byte           parm3;    // destination/source map section (TRIGGER_EXIT, TRIGGER_ENTRANCE, TRIGGER_TELEPORT)
     byte           srcx;     // sposition
     byte           srcy;     // sposition
     byte           type;     // script type, one of TRIGGER_
     byte           u2[3];    // ?
     byte           x;        // position
     byte           y;        // position
     byte           u3[3];    // ?
}bo_trigger_t;

// map item
typedef struct
{
     unsigned short savenum;  // unique savegame id
     byte           itemcode; // one of MAPITEM_ code
     byte           x;        // position
     byte           y;        // position
     byte           hidden;   // set to 1 if item is spawned by trigger (like barrel destruction)
     unsigned short target;   // targeted triggergroup
     byte           u[4];     // ?
}bo_item_t;

// animated tile
typedef struct
{
     unsigned short targetnum;// a triggergroup
     byte x;                  // position
     byte u1;                 // ?
     byte y;                  // position
     byte u2;                 // ?
     unsigned short tile1;    // tilenum
     unsigned short tile2;    // alternate state tilenum
     byte contents1;          // contents, see CONTENTS_ defines for possible content values
     byte contents2;          // alternate state contents
     byte u3[12];             // ?
}bo_atile_t;

// button controller
typedef struct
{
     unsigned short target;   // a triggergroup to call
     unsigned short tile1;    // tilenum
     unsigned short tile2;    // alternate state tilenum
     byte flags;              // see BUTTONFLAG_* defs
     byte u1;                 // ?
     unsigned short savenum;  // unique savegame id
     byte u2;                 // ?
     byte u3;                 // ?
}bo_button_t;

// effect
typedef struct
{
     byte x;                  // position
     byte y;                  // position
     byte lightposx;          // position of lightsource
     byte lightposy;          // position of lightsource
     byte sprite;             // index of sprite from sprites array
     byte lightsizex;         // size of light polygons
     byte lightsizey;         // size of light polygons
     byte u1;                 // ?
     byte lightform;          // light form flags
     byte r;                  // red color component
     byte g;                  // green color component
     byte b;                  // darkblue color component
     unsigned short targetnum;// triggergroup
     byte start_on;           // 1 if effect starts on, 0 if starts off
     byte u3[5];              // ?
}bo_effect_t;

typedef struct
{
     byte data[164];
}bo_object_t;

// tile object definition (barrels, chests)
typedef struct
{
     byte x;                  // start position
     byte y;                  // end position
     byte w;                  // width
     byte h;                  // height
     byte ofsx;               // multiply by 16 to get real offset
     byte ofsy;               // multiply by 16 to get real offset
     byte u1;
     byte u2;
}bo_grpobject_t;

// scenery entities
typedef struct
{
     byte u1;                 // ?
     byte u2;                 // ?
     byte u3;                 // ?
     byte u4;                 // ?
     unsigned short tile1;    // base tile (grpobject really, not standart 32x32 tile)
     unsigned short tile2;    // toggled tile (grpobject)
     unsigned short tile3;    // destroyed tilee (grpobject)
     byte u5;                 // ?
     byte u6;                 // ?
     byte pushable;           // a strength required to push
     byte toggled;            // trigger can toggle it's state (means tile2 is there)
     byte u7;                 // ?
     byte spawnitems[3];      // item codes to spawn when toggled/destroyed
     byte u8;                 // ?
     byte destructible;       // destructible flags
     unsigned short savenum;  // unique savegame id
     byte u10;                // ?
     byte x;                  // position
     byte y;                  // position
     byte u11;                // ? 
     byte active;             // 1 is filled, otherwise 0
     byte u13;                // ? 
}bo_scenery_t;

// enemy paths
typedef struct
{
     byte x;                  // position
     byte y;                  // position
     byte u1;                 // ?
     byte u2;                 // ?
}bo_path_t;

// enemy entity
typedef struct
{
     bo_path_t paths[4];      // patrole paths
     byte u1[12];             // ?
     unsigned short savenum;  // unique savegame id
     byte u2[52];             // ?
     byte charnum;            // monster class (same as char* sprite)
     byte u3[10];             // ?
     unsigned short target;   // triggergroup to call once killed
     byte u4[20];             // ?
     byte lastpath;           // ?
     byte u6[18];             // ?
     byte u7[15];             // ?
     byte x;                  // position
     byte y;                  // position
     byte u8[4];              // ?
     unsigned short speechnum;// a speech number for disguise talk
     byte u9[6];              // ?
}bo_monster_t;

// general map file structure
typedef struct
{
     // a chain of tilemap numbers used (to make a filenames)
     // each tilemap holds 64 tiles, tiles numbering is linear
     // like, a tile #131 is tile #3 from tilemap #2
     // being 2-byte (unsigned short) tilenum contains some flags (flag are starting from byte 10)
     // see TILEFLAG_ defines for possible tileflags
     unsigned short  tilemaps[40];
     // yet unknown info
     byte            u1[12];
     bo_object_t     objects[10];
     bo_monster_t    monsters[32];
     bo_grpobject_t  grpobjects[8][32];
     // animated tiles - a tiles that can be toggled between 2 states and have different contents for each state
     // used on doors, spikes that pops up on the floor etc.
     // animated tiles have triggergroup to be executed by script
     bo_atile_t      atiles[100];
     // a special buttons array holds all buttons used on level
     // pretty similar to animated tiles
     // buttons have triggergroup to be executed by script
     bo_button_t     buttons[20];
     // yet unknown info #2
     byte            u2[8];
     // scenery pushable objects - tables, chairs, stones etc.
     bo_scenery_t    scenery[256];
     // first tilemap
     unsigned short  backtiles[80][80];
     // second tilemap
     unsigned short  foretiles[80][80];
     // contents map - a contents value for each static tile (in game they get overriden by switchable tiles if presented)
     // see CONTENTS_ defines for possible content values
     byte            contents[80][80];
     // linear triggers array - all triggers used on map
     bo_trigger_t    triggers[255];
     // triggers are non-solid interaction points, activated when player stands in them
     // this array golds pointers to triggers
     byte            triggertiles[80][80];
     // items placed on level
     // itemcodes 0-9 are powerups, codes 10, 11, 12, 13 reserved for unique item codes
     // so there will be not more than 4 unique item type per level
     // unique items are: spells, weapons, forms, artifacts, tokens
     byte            uniqueitems[4];
     bo_item_t       items[50];
     // yet unknown data
     byte            u4[8];
     byte            u5[8][40];
     byte            u6[24];
     // effects
     unsigned short  sprites[8];
     bo_effect_t     effects[64];
     // yet unknown data
     byte   u7[936];
}bo_map_t;

// things that are not figured out yet:
// - how lightning is done (variable form lights, day-night light, ambient light)
// - monster's paths's switch (some paths are messed up)
// - counters and puzzle triggers?

// tileflags
#define TILEFLAG_UNKNOWN1       1024
#define TILEFLAG_NODRAW         2048
#define TILEFLAG_UNKNOWN3       4096
#define TILEFLAG_UNKNOWN4       8192
#define TILEFLAG_ALWAYSONTOP    16384
#define TILEFLAG_UNKNOWN6       32768

// contents
#define CONTENTS_SOLID          1
#define CONTENTS_WATER          2
#define CONTENTS_LAVA           3
#define CONTENTS_FIRE           4
#define CONTENTS_SPIKES         5
#define CONTENTS_TRAPTELEPORT   6
#define CONTENTS_JUMPWALL       8
#define CONTENTS_SWAMP          11
#define CONTENTS_JUMPFENCE      10
#define CONTENTS_MISTWALK       12
#define CONTENTS_SACRIFICE      13
#define CONTENTS_ICE            19
#define CONTENTS_SAVEGAM        44
#define CONTENTS_BATMARK        45

// triggers
#define TRIGGER_EXIT            1
#define TRIGGER_ENTRANCE        2
#define TRIGGER_SPEECHMARK      3
#define TRIGGER_TOUCH           4
#define TRIGGER_TELEPORT        6
#define TRIGGER_IMAGEMARK       7

// button flags
#define BUTTONFLAG_TOGGLE       1
#define BUTTONFLAG_SECRET       2

// item codes
#define MAPITEM_SMALLBLOODFLASK 1
#define MAPITEM_BLOODFLASK      2
#define MAPITEM_RUNEPYRAMID     3
#define MAPITEM_PURPLESPHERE    4
#define MAPITEM_BLUESPHERE      5
#define MAPITEM_GREENSPHERE     6
#define MAPITEM_GOLDSPHERE      7
#define MAPITEM_REDSPHERE       8
#define MAPITEM_ANCIENTVIAL     9
#define MAPITEM_UNIQUE1         10 // unique item codes
#define MAPITEM_UNIQUE2         11 // unique item codes
#define MAPITEM_UNIQUE3         12 // unique item codes
#define MAPITEM_UNIQUE4         13 // unique item codes

// unique item codes
#define ITEM_SPELL_INSPIREHATE  10
#define ITEM_SPELL_STUN         11
#define ITEM_SPELL_SPIRITWRACK  12
#define ITEM_SPELL_BLOODGOUT    13
#define ITEM_SPELL_BLOODSHOWER  14
#define ITEM_SPELL_SPIRITDEATH  15
#define ITEM_SPELL_LIGHT        16
#define ITEM_SPELL_LIGHTNING    17
#define ITEM_SPELL_REPEL        18
#define ITEM_SPELL_ENERGYBOLT   19
#define ITEM_SPELL_INCAPACITATE 20
#define ITEM_SPELL_CONTROLMIND  21
#define ITEM_SPELL_SANCTUARY    22
#define ITEM_ARTIFACT_FLAY      23
#define ITEM_ARTIFACT_PENTALICH 24
#define ITEM_ARTIFACT_IMPLODE   25
#define ITEM_ARTIFACT_FONT      26
#define ITEM_ARTIFACT_BANK      27
#define ITEM_ARTIFACT_HEART     28
#define ITEM_ARTIFACT_ANTITOXIN 29
#define ITEM_ARTIFACT_SLOWTIME  30
#define ITEM_TOKEN_MOEBIUS      31
#define ITEM_TOKEN_DEJOULE      32
#define ITEM_TOKEN_DOLL         33
#define ITEM_TOKEN_MALEK        34
#define ITEM_TOKEN_AZIMUTH      35
#define ITEM_TOKEN_MORTANIUS    36
#define ITEM_TOKEN_NUPRAPTOR    37
#define ITEM_TOKEN_BANE         38
#define ITEM_TOKEN_SIGNETRING   39
#define ITEM_TOKEN_TIMEDEVICE   40
#define ITEM_TOKEN_ANACROTHE    41
#define ITEM_WEAPON_MACE        43
#define ITEM_WEAPON_AXES        44
#define ITEM_WEAPON_FLAMESWORD  45
#define ITEM_WEAPON_SOULREAVER  46
#define ITEM_ARMOR_BONE         48
#define ITEM_ARMOR_CHAOS        49
#define ITEM_ARMOR_FLESH        50
#define ITEM_ARMOR_WRAITH       51
#define ITEM_FORM_BAT           53
#define ITEM_FORM_WOLF          54
#define ITEM_FORM_DISGUISE      55
#define ITEM_FORM_MIST          56
#define ITEM_ENDING_1           69
#define ITEM_ENDING_2           70

Compression methods

Index-based Run Length Encoding (RLE)

Used on sprite data to compress black areas which is normally transparent. This technique alters reading process of byte 0x0 and 0xFF. If got this byte when reading picture data, should read 1 byte more which will be times to repeat this byte. Blood Omen RLE only used for values 0x00 or 0xFF.

Example:

// output 32 bytes with value 0xFF
0xFF 0x20

4-bit images

Encode 2 pixels per byte with 256 color palette but with only 16 colors used (other pixels are black).

For each byte it produces 2 bytes in order:

  • byte 1 : <byte> - (int)(<byte>/16)*16; // <byte> mod 16
  • byte 2 : (int)(<byte>/16) // <byte> div 16

Example:

 231 will output 2 pixels with values:
 byte 1 : 7
 byte 2 : 14

Variation of LZ77

A variation of the LZ77 (LZ1) data compression algorithms.

Sample decoder can be found at The Lost Worlds and Blood Pill sourcecode.

Credits

  • Andrey [Rackot] Grachev - Bigfile specs
  • Pavel [VorteX] Timofeyev - Map file, sprites
  • Ben Lincoln - LZ77 decompressor
  • JAM decoding specs by MisterGrim
  • Balder and Zench from XentaX forums (www.xentax.com) - IMA ADPCM

See also

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox